Stainless Steel Belt Channel Dryer

Technical Parameters：

1)  Equipment name: continuous mesh belt type drying machine.
2)  Mesh belt width: 0.5-1.5 mm
3)  Mesh belt layers: can be 3, 5, 7 layer (different capacity and grain moisture requires different layers and drying case length)
4)  Drying temperature: 80-150 degree
5)  Water evaporation capacity: 20-120 kg/h
6)  Mesh belt feeding speed: 2-9 m/h (frequency speed regulation)
7)  Heating method: Optional with electric heating, steam heating (steam press is 0.3-0.6Mpa), oil heating etc to be heat source. Most commonly used electric heating and steam heating.

Features：

In mesh belt dryer system, the following data can be special set and adjusted in order to achieve best drying effect: heating temperature,air flow,staying time.Agility specified : we can add mesh belt washing system and product cooling system in mesh belt dryer system.Agility operating: after conveying on mesh belt, wet material is dried in a total sealed chamber during whole drying process. Working condition is good because the system do not have powder leaking out side. When wet material loaded in conveying belt, relative position between each single material is quite stable.